！Before installation, confirm that：
This high-performance component does not comply with the laws and regulations for highway driving and cannot be used on any vehicle that has been registered or certified for use on highways. This means that the component may only be suitable for racing cars or other off-road vehicles. If it is installed on vehicles driving on the highway, legal issues will be borne by oneself.
This is the installation process for the ER-0213: 2017-2019 L5P Duramax Diesel 4pcs Can Bus Plugs Connector, for your reference during the installation process.
Step 1:
Find the plug on the lower internal frame rail at the rear of the truck and unplug it, then clip one of the black plugs provided in the kit onto the factory socket port.
Note:Before installation, some electrical grease can be applied to prevent corrosion.
Step 2:
Find the second plug along the external frame guide rail. Before removing the plug, pop out the red label and fasten the black plug of the kit to the factory plug port.
Step 3:
Find the third plug under the hood on the driver's side along the firewall, and clip the black plug of the kit onto the factory plug port.
Step 4:
On the other side of the fuel tank, under the front of the truck, find and disconnect the white plug above the torsion bar, and install the CANBUS plug. Similarly, before removing the plug, the red label needs to be popped out.
This high-performance component does not comply with the laws and regulations for highway driving and cannot be used on any vehicle that has been registered or certified for use on highways. This means that the component may only be suitable for racing cars or other off-road vehicles. If it is installed on vehicles driving on the highway, legal issues will be borne by oneself.
This is the installation process for the ER-0213: 2017-2019 L5P Duramax Diesel 4pcs Can Bus Plugs Connector, for your reference during the installation process.
Find the plug on the lower internal frame rail at the rear of the truck and unplug it, then clip one of the black plugs provided in the kit onto the factory socket port.
Note:Before installation, some electrical grease can be applied to prevent corrosion.
Find the second plug along the external frame guide rail. Before removing the plug, pop out the red label and fasten the black plug of the kit to the factory plug port.
Find the third plug under the hood on the driver's side along the firewall, and clip the black plug of the kit onto the factory plug port.
On the other side of the fuel tank, under the front of the truck, find and disconnect the white plug above the torsion bar, and install the CANBUS plug. Similarly, before removing the plug, the red label needs to be popped out.
Related installation manual：
2017-2024 6.6L Chevy Duramax L5P CCV Reroute/delete kit
2017-2023 6.6L Chevy L5P Duramax Diesel 3.5" Downpipe Exhaust
2017-2023 6.6L Chevy GMC Duramax L5P diesel EGR Valve Cooler Delete kit
2017-2023 6.6L GM DURAMAX L5P 4"/5" Downpipe Back DPF Delete Pipe
2017-2023 6.6L Chevy GMC Duramax L5P 4" DPF & CAT Delete Race Pipe
Last edited:
