2006-2024 5.9L/6.7L Dodge Ram Cummins Billet Valve Cover

！Before installation, confirm that：

This high-performance component does not comply with the laws and regulations for highway driving and cannot be used on any vehicle that has been registered or certified for use on highways. This means that the component may only be suitable for racing cars or other off-road vehicles. If it is installed on vehicles driving on the highway, legal issues will be borne by oneself.

This is the installation process for the ER-0275: 2006-2024 5.9L/6.7L Dodge Ram Cummins Billet Valve Cover,provided for your reference during installation.

​

Step 1:
First, park the vehicle on a level surface and ensure the engine is cool. Open the hood and disconnect the negative terminal of the battery.

Step 2:
Remove the original valve cover.

1. Locate the original valve cover. First, disconnect any hoses, electrical connectors, or brackets that may obstruct removal.
2. Using an 8mm socket wrench, carefully unscrew the bolts of the valve cover, and be sure to keep the bolts and other parts safe.
3.After removing the screws, gently remove the original valve cover from the engine.​

Step 3:
Next, gently remove the crankcase ventilation filter.

Step 4:
Using a 10mm socket wrench, unscrew the six bolts securing the original valve cover base. Ensure you don't miss any sensors or connectors attached to the valve cover. The valve cover base can then be removed.

Step 5:
Now, inspect the gasket. If the gasket is cracked or worn, replace it.

Step 6:
Carefully install the Cummins aluminum billet valve cover onto the engine, ensuring it is perfectly aligned with the bolt holes. Install the bolts and tighten them in a cross pattern to evenly distribute pressure and prevent valve cover deformation.

Step 7:
Finally, reconnect all the hoses, wires, or brackets that were removed. Carefully check that all parts are securely in place and that everything is working correctly.

Related installation manual：​

Oil Catch Reservoir Breather Can Tank with Filter Cylinder Aluminum Universal​

2009-2019 6.7L Dodge Ram Cummins Coolant Bypass Barb Leak repair Adapter Kit​

2009-2019 6.7L RAM Cummins Coolant Hose Barb Adapter Leaking Repair Kit​

2007-2018 6.7L Dodge RAM 2500 3500 Cummins Diesel 3.5inch High Flow Intake Manifold Elbow Tube Horn​

2007-2009 6.7L Dodge Ram Cummins Diesel EGR Delete Kit​

2010-2012 6.7 Dodge Ram Cummins 4" Turbo-Back DPF Delete Pipe​

2007.5-2012 6.7L Dodge Ram Cummins 2500/3500 4" DPF Delete Race Pipe​

2007.5-2024 Dodge Ram 6.7L Intake Air Temperature Sensor Extension Harness Diesel​

2009-2024 6.7L Ram Cummins 2500 3500 EGR Valve Cooler Delete Kit​

2007.5-2018 6.7L Dodge Cummins 2500 3500 CCV Black Crankcase Ventilation Diesel​

2010-2024 6.7L Ram Cummins 2500 3500 EGR Valve Cooler Delete Kit​

2007-2024 6.7L Dodge Ram Cummins EGR Throttle Valve Delete Kit​

2010+ Dodge Ram Cummins EZ-Lynk/CCV SOTF Switch​

2007.5-2012 6.7L Dodge Ram Cold Air Intake w/Filter​

2013-2018 6.7L Ram Cummins Diesel EGR Cooler Throttle Valve Delete Kit​

2013-2018 6.7L Ram Cummins 5" Turbo Back DPF Delete Pipe (With Muffler )​

2013-2018 6.7L Ram Cummins 5" Turbo Back DPF Delete Pipe​

2013-2018 6.7L Dodge Ram Cummins 4" Downpipe back DPF Delete Pipe​

2013-2018 6.7L Ram 2500 3500 Turbo Diesel 4" Exhaust Tube Pipe Kit​

2019-2024 6.7L Ram Cummins 5" DPF Delete Downpipe Back Exhaust​

2019-2024 6.7L Ram Cummins 4" DPF Delete Downpipe Back Exhaust​

2019-2024 6.7L Dodge Ram Cummins 4" Cat & DPF Delete Pipe​

2018-2024 6.7L Dodge RAM Cummins Bypass Cable​

2018+ RAM Cummins OBD2 HD Security Gate Bypass Cable​

2018-2023 Ram Cummins Pickup Cummins SGW Security Gateway PassThru Harness Bypass​