！Before installation, confirm that：
This high-performance component does not comply with the laws and regulations for highway driving and cannot be used on any vehicle that has been registered or certified for use on highways. This means that the component may only be suitable for racing cars or other off-road vehicles. If it is installed on vehicles driving on the highway, legal issues will be borne by oneself.
This is the installation process for the ER-0068: 2009-2019 6.7L RAM Cummins Coolant Hose Barb Adapter Leaking Repair Kit,provided for your reference during installation.
Step1:
Dismantle the coolant pipeline or EGR cooler.Insert the black coolant adapter into the pipeline.
Connect the O-ring washer to the cooler adapter with screws.
Step 2:
Loosen the screws of the riser, insert the connected cooler adapter into the pipeline, and place the O-ring on the screws of the riser.
Step 3:
Connect the cooling pipe to the cooling adapter and secure it with the clamp provided in the kit.
Step 4:
The installation of the EGR removal kit has been completed and can be tested. Start the engine and run it until the coolant circulates. If necessary, fill up the cooling system and carefully check for leaks.
This high-performance component does not comply with the laws and regulations for highway driving and cannot be used on any vehicle that has been registered or certified for use on highways. This means that the component may only be suitable for racing cars or other off-road vehicles. If it is installed on vehicles driving on the highway, legal issues will be borne by oneself.
This is the installation process for the ER-0068: 2009-2019 6.7L RAM Cummins Coolant Hose Barb Adapter Leaking Repair Kit,provided for your reference during installation.
Dismantle the coolant pipeline or EGR cooler.Insert the black coolant adapter into the pipeline.
Connect the O-ring washer to the cooler adapter with screws.
Loosen the screws of the riser, insert the connected cooler adapter into the pipeline, and place the O-ring on the screws of the riser.
Connect the cooling pipe to the cooling adapter and secure it with the clamp provided in the kit.
The installation of the EGR removal kit has been completed and can be tested. Start the engine and run it until the coolant circulates. If necessary, fill up the cooling system and carefully check for leaks.
Related installation manual：
2007-2024 6.7L Dodge Ram Cummins EGR Throttle Valve Delete Kit
2009-2019 6.7L Dodge Ram Cummins Coolant Bypass Barb Leak repair Adapter Kit
2007-2018 6.7L Dodge RAM 2500 3500 Cummins Diesel 3.5inch High Flow Intake Manifold Elbow Tube Horn
2007-2009 6.7L Dodge Ram Cummins Diesel EGR Delete Kit
2010-2012 6.7 Dodge Ram Cummins 4" Turbo-Back DPF Delete Pipe
2007.5-2012 6.7L Dodge Ram Cummins 2500/3500 4" DPF Delete Race Pipe
2007.5-2024 Dodge Ram 6.7L Intake Air Temperature Sensor Extension Harness Diesel
2009-2024 6.7L Ram Cummins 2500 3500 EGR Valve Cooler Delete Kit
2007.5-2018 6.7L Dodge Cummins 2500 3500 CCV Black Crankcase Ventilation Diesel
2010-2024 6.7L Ram Cummins 2500 3500 EGR Valve Cooler Delete Kit
2006-2024 5.9L/6.7L Dodge Ram Cummins Billet Valve Cover
2010+ Dodge Ram Cummins EZ-Lynk/CCV SOTF Switch
2007.5-2012 6.7L Dodge Ram Cold Air Intake w/Filter
2013-2018 6.7L Ram Cummins Diesel EGR Cooler Throttle Valve Delete Kit
2013-2018 6.7L Ram Cummins 5" Turbo Back DPF Delete Pipe (With Muffler )
2013-2018 6.7L Ram Cummins 5" Turbo Back DPF Delete Pipe
2013-2018 6.7L Dodge Ram Cummins 4" Downpipe back DPF Delete Pipe
2013-2018 6.7L Ram 2500 3500 Turbo Diesel 4" Exhaust Tube Pipe Kit
Last edited:
