！Before installation, confirm that：
This high-performance component does not comply with the laws and regulations for highway driving and cannot be used on any vehicle that has been registered or certified for use on highways. This means that the component may only be suitable for racing cars or other off-road vehicles. If it is installed on vehicles driving on the highway, legal issues will be borne by oneself.
This is the installation process for the ER-0294: 2007.5-2024 Dodge Ram 6.7L Intake Air Temperature Sensor Extension Harness Diesel,provided for your reference during installation.
The following example demonstrates how to use the intake air temperature sensor extension harness, using the delete of the heater grid as an example. The method for moving the intake air temperature sensor is similar in other cases.
Step 1:
First, locate the original intake air temperature sensor and its wiring harness connector in the engine intake system.
Step 2:
Gently disconnect the sensor from the original wiring harness connector to complete the sensor relocation.
Step 3:
Insert one end of the extension harness into the sensor and the other end into the original wiring harness connector.
Step 4:
Secure the extension harness away from high-temperature components using cable ties to prevent interference or wear.
This high-performance component does not comply with the laws and regulations for highway driving and cannot be used on any vehicle that has been registered or certified for use on highways. This means that the component may only be suitable for racing cars or other off-road vehicles. If it is installed on vehicles driving on the highway, legal issues will be borne by oneself.
This is the installation process for the ER-0294: 2007.5-2024 Dodge Ram 6.7L Intake Air Temperature Sensor Extension Harness Diesel,provided for your reference during installation.
The following example demonstrates how to use the intake air temperature sensor extension harness, using the delete of the heater grid as an example. The method for moving the intake air temperature sensor is similar in other cases.
Step 1:
First, locate the original intake air temperature sensor and its wiring harness connector in the engine intake system.
Step 2:
Gently disconnect the sensor from the original wiring harness connector to complete the sensor relocation.
Step 3:
Insert one end of the extension harness into the sensor and the other end into the original wiring harness connector.
Step 4:
Secure the extension harness away from high-temperature components using cable ties to prevent interference or wear.
Last edited:
