!Before installation, confirm that:
This product is intended exclusively for off-road competition or off-road use. Prior to installation, you must ensure that the vehicle has been flashed with a compatible tuning program (Tune). During installation, it is imperative to use zip ties to secure the wiring harness in a heat-shielded location, positioned well away from the exhaust system. The user assumes full responsibility for any vehicle damage or legal liabilities resulting from illegal use, failure to apply the necessary tuning program, or improper installation (such as the melting of the wiring harness).
This is the installation process for the ER-0323: 2020-2022 6.7L Ford Powerstroke Tuner Harness Plug Kit,provided for your reference during installation.
This kit is specifically designed for 2020–2022 Ford 6.7L Powerstroke diesel vehicles. Following the tuning and physical removal of the EGR and DPF systems, numerous unused factory wiring connectors remain within the vehicle's chassis and engine bay.
Elimination of Hazards : Prevents electrical interference caused by exposed connectors, ensuring the stable and reliable operation of the modified system.
Waterproof Sealing : Prevents rain, wash water, or road spray from entering open connectors and causing short circuits.
Corrosion and Dust Protection : Blocks dirt, debris, and road salt from corroding the connector pins, thereby safeguarding sensitive signal circuits.
This product is intended exclusively for off-road competition or off-road use. Prior to installation, you must ensure that the vehicle has been flashed with a compatible tuning program (Tune). During installation, it is imperative to use zip ties to secure the wiring harness in a heat-shielded location, positioned well away from the exhaust system. The user assumes full responsibility for any vehicle damage or legal liabilities resulting from illegal use, failure to apply the necessary tuning program, or improper installation (such as the melting of the wiring harness).
This is the installation process for the ER-0323: 2020-2022 6.7L Ford Powerstroke Tuner Harness Plug Kit,provided for your reference during installation.
This kit is specifically designed for 2020–2022 Ford 6.7L Powerstroke diesel vehicles. Following the tuning and physical removal of the EGR and DPF systems, numerous unused factory wiring connectors remain within the vehicle's chassis and engine bay.
Elimination of Hazards : Prevents electrical interference caused by exposed connectors, ensuring the stable and reliable operation of the modified system.
Waterproof Sealing : Prevents rain, wash water, or road spray from entering open connectors and causing short circuits.
Corrosion and Dust Protection : Blocks dirt, debris, and road salt from corroding the connector pins, thereby safeguarding sensitive signal circuits.
ID | Name | Location | Installation |
1 | EGR Main Harness | Engine bay, passenger side | Connects to the large main harness previously feeding the EGR cooler assembly. |
2 | DEF Pump Main | Above the DEF tank | Seals the high-current main power and data feed for the DEF pump. |
3 | NOx Sensor 1 | Exhaust downpipe (front) | Caps the harness for the first Nitrogen Oxide sensor located near the turbo. |
4 | Fuel Pressure/Temp | Engine fuel rail area | Small brown plug used for auxiliary fuel system sensor shielding. |
5 | EGR Actuator | EGR assembly | Small green plug specifically for the EGR butterfly valve/actuator connector. |
6, 11-15 | EGT Sensors (Set of 6) | Throughout the exhaust system | Caps all Exhaust Gas Temperature sensors (EGT A, B, C, D, E, and Downpipe sensor). |
7 | DEF Level & Quality | Top of the DEF tank | Caps the multi-pin connector for the DEF fluid tank level and quality sensor. |
8 | NOx Sensor 2 | Mid-exhaust section | Caps the harness for the second (rear) Nitrogen Oxide sensor. |
9 | DEF Injector (Doser) | Exhaust downpipe | Caps the electrical connector for the DEF urea dosing injector. |
10 | Throttle Valve | Intake manifold | Seals the connector for the electronic intake throttle valve. |
Last edited: